Tutorial for Bootable Pendrive for Windows 7

Installing Windows 7 from a Pendrive/ Bootable Pendrive to install Windows 7

Make sure you have a Pendrive or USB drive with a minimum of 4 GB space and you have the Windows 7 installation Files. If you have Image of Windows than extract it to a folder. Now Follow the Steps:

1. Format the Pendrive or USB drive in NTFS format first.
2. From the start menu right click on the command prompt and select "Run as administrator".
3. Now type the following commands (Press enter key after each command).
4. diskpart. This is to open the disk partition program.
5. Now to show the list of drives type list disk.
6. You can see disk's listed there. Note down the disk number of your pendrive eg. Disk .
7. Now type SELECT DISK X (where X is the number you noted down for the pendrive from step 5)
8. Now type CLEAN.
9. Now type the following commands by pressing enter after each one.
10. CREATE PARTITION PRIMARY
11. SELECT PARTITION 1 (Assuming your pendrive/ USB drive is 1).
12. ACTIVE
13. FORMAT FS=NTFS
14. ASSIGN
15. EXIT(Now the disk partition program will exit). Now we need to give some more commands.
16. Now Copy the all Content of IMAGE (NOT IMAGE ITSELF), you have extracted to the Pendrive.
17. Plug / Insert your pendrive to your PC and restart the system.
18. Now Enter the Bios system accordingly by pressing the key delete.(This may vary some times it will be F2 or F12. It depends on the type of your system. Any how during the start up your system will display which key to press to enter the Bios).
19. Now select the USB/ Pendrive as the first boot driver.(Set the first boot priority to USB drive.).
20. Now save the settings in Bios and restart and you will be able to Install Windows 7 using that pendrive.

If you liked it make a comment . Feel Free to ask if you have any doubts. I will Try my best to Help You.